042406052221

Product highlightsgooseneck microphone for podiums and lecterns mute button lets you choose when the mic is «hot» 130° cardioid polar pattern shock mount isolates mic from surface noise includes mic preamp attached to gooseneck gain can be reduced by 12dB (internal modification to circuit board required, using supplied 1mm Allen wrench) frequency response: 50-17,000 Hz output impedance: 150 ohms 18″ flexible gooseneck XLR connector requires 11 to 52-volt phantom power on your mixer or audio interface locking flange mount for permanent installation snap-fit foam windscreen 1/2″ diameter x 23-3/4″ total length weight: 6.2 oz. warranty: 2 years What’s in the boxMX418S/C Gooseneck microphone Mounting flange Shock mount assembly Foam windscreen Four 3/4″ Screws User guide Optional accessory list Safety & warranty information About this itemWritten by Crutchfield’s Eric A.A flexible podium mic The Shure Microflex MX418S/C is an excellent microphone for public speaking venues. The mic features an 18″ flexible gooseneck stand that can be permanently attached to a tabletop, and a mute button so you can choose when the mic is «hot.» The mic’s built-in shock mount helps isolate it from surface vibration noise. And its windscreen ensures pops and sibilants are minimized. Cardioid polar pattern and swappable mic capsule The MX418S/C includes a cardioid mic capsule with 130° polar pattern. This pattern helps reject off-axis sounds coming from the sides while picking up the voice of the speaker at the podium or lectern. The mic capsule is interchangeable — additional capsules with different pickup patterns are available from the manufacturer. Includes a built-in mic preamp The mic’s output is male three-pin XLR. An attached preamplifier at the base of the gooseneck allows you to reduce the gain by 12dB if necessary (requires internal modification with supplied Allen wrench).

Product highlightsgooseneck microphone for podiums and lecterns mute button lets you choose when the mic is «hot» 130° cardioid polar pattern shock mount isolates mic from surface noise includes mic preamp attached to gooseneck gain can be reduced by 12dB (internal modification to circuit board required, using supplied 1mm Allen wrench) frequency response: 50-17,000 Hz output impedance: 150 ohms 18″ flexible gooseneck XLR connector requires 11 to 52-volt phantom power on your mixer or audio interface locking flange mount for permanent installation snap-fit foam windscreen 1/2″ diameter x 23-3/4″ total length weight: 6.2 oz. warranty: 2 years What’s in the boxMX418S/C Gooseneck microphone Mounting flange Shock mount assembly Foam windscreen Four 3/4″ Screws User guide Optional accessory list Safety & warranty information About this itemWritten by Crutchfield’s Eric A.A flexible podium mic The Shure Microflex MX418S/C is an excellent microphone for public speaking venues. The mic features an 18″ flexible gooseneck stand that can be permanently attached to a tabletop, and a mute button so you can choose when the mic is «hot.» The mic’s built-in shock mount helps isolate it from surface vibration noise. And its windscreen ensures pops and sibilants are minimized. Cardioid polar pattern and swappable mic capsule The MX418S/C includes a cardioid mic capsule with 130° polar pattern. This pattern helps reject off-axis sounds coming from the sides while picking up the voice of the speaker at the podium or lectern. The mic capsule is interchangeable — additional capsules with different pickup patterns are available from the manufacturer. Includes a built-in mic preamp The mic’s output is male three-pin XLR. An attached preamplifier at the base of the gooseneck allows you to reduce the gain by 12dB if necessary (requires internal modification with supplied Allen wrench).

Product highlightsgooseneck microphone for podiums and lecterns mute button lets you choose when the mic is «hot» 130° cardioid polar pattern shock mount isolates mic from surface noise includes mic preamp attached to gooseneck gain can be reduced by 12dB (internal modification to circuit board required, using supplied 1mm Allen wrench) frequency response: 50-17,000 Hz output impedance: 150 ohms 18″ flexible gooseneck XLR connector requires 11 to 52-volt phantom power on your mixer or audio interface locking flange mount for permanent installation snap-fit foam windscreen 1/2″ diameter x 23-3/4″ total length weight: 6.2 oz. warranty: 2 years What’s in the boxMX418S/C Gooseneck microphone Mounting flange Shock mount assembly Foam windscreen Four 3/4″ Screws User guide Optional accessory list Safety & warranty information About this itemWritten by Crutchfield’s Eric A.A flexible podium mic The Shure Microflex MX418S/C is an excellent microphone for public speaking venues. The mic features an 18″ flexible gooseneck stand that can be permanently attached to a tabletop, and a mute button so you can choose when the mic is «hot.» The mic’s built-in shock mount helps isolate it from surface vibration noise. And its windscreen ensures pops and sibilants are minimized. Cardioid polar pattern and swappable mic capsule The MX418S/C includes a cardioid mic capsule with 130° polar pattern. This pattern helps reject off-axis sounds coming from the sides while picking up the voice of the speaker at the podium or lectern. The mic capsule is interchangeable — additional capsules with different pickup patterns are available from the manufacturer. Includes a built-in mic preamp The mic’s output is male three-pin XLR. An attached preamplifier at the base of the gooseneck allows you to reduce the gain by 12dB if necessary (requires internal modification with supplied Allen wrench).

Product highlightsgooseneck microphone for podiums and lecterns mute button lets you choose when the mic is «hot» 130° cardioid polar pattern shock mount isolates mic from surface noise includes mic preamp attached to gooseneck gain can be reduced by 12dB (internal modification to circuit board required, using supplied 1mm Allen wrench) frequency response: 50-17,000 Hz output impedance: 150 ohms 18″ flexible gooseneck XLR connector requires 11 to 52-volt phantom power on your mixer or audio interface locking flange mount for permanent installation snap-fit foam windscreen 1/2″ diameter x 23-3/4″ total length weight: 6.2 oz. warranty: 2 years What’s in the boxMX418S/C Gooseneck microphone Mounting flange Shock mount assembly Foam windscreen Four 3/4″ Screws User guide Optional accessory list Safety & warranty information About this itemWritten by Crutchfield’s Eric A.A flexible podium mic The Shure Microflex MX418S/C is an excellent microphone for public speaking venues. The mic features an 18″ flexible gooseneck stand that can be permanently attached to a tabletop, and a mute button so you can choose when the mic is «hot.» The mic’s built-in shock mount helps isolate it from surface vibration noise. And its windscreen ensures pops and sibilants are minimized. Cardioid polar pattern and swappable mic capsule The MX418S/C includes a cardioid mic capsule with 130° polar pattern. This pattern helps reject off-axis sounds coming from the sides while picking up the voice of the speaker at the podium or lectern. The mic capsule is interchangeable — additional capsules with different pickup patterns are available from the manufacturer. Includes a built-in mic preamp The mic’s output is male three-pin XLR. An attached preamplifier at the base of the gooseneck allows you to reduce the gain by 12dB if necessary (requires internal modification with supplied Allen wrench).